如何装载20英尺高柜集装箱

分步装柜指南 - 20英尺高柜集装箱的重量分配、堆叠规则和固定技巧

内部尺寸

5.90m × 2.35m × 2.70m

可用体积

37.4 m³

最大载重

28,080 kg

皮重

~2,300 kg

最大装载高度

2.70m内部高度

Drag to rotate · Scroll to zoom
装箱指南

分步装箱指南

01

规划额外高度

高柜提供2.70m的内部高度——比标准集装箱多31cm。这完全改变了您的堆叠策略。规划您的货物并识别可以双层堆叠但在标准箱中无法装入的货物。计算额外的4+ CBM顶部空间是否值得支付高柜附加费。对于托盘货物,如果装载托盘高度低于1.30m,则规划双层堆叠。

02

检查集装箱

装货前检查集装箱是否有结构损坏、孔洞、进水和异味。特别注意顶部——高柜更高,更容易因低桥和堆叠冲击而造成顶角损坏。检查地板状况是否有软点。测试门封条和锁杆。用照片记录任何预先存在的损坏。

03

最重的货物先装,保持低重心

将最重的货物放在前壁的地板上。有2.70m的高度可用时,容易产生将重物堆高的诱惑——请抵制这种做法。高重心在高柜中更加危险,因为更高的集装箱在船舶摇摆时具有更大的杠杆作用。将重物保持在地板上,并利用额外高度在顶部放置较轻的大体积货物。

04

双层堆叠托盘并充分利用高度

高柜的关键优势是双层堆叠。标准装载托盘(高1.20-1.30m)可以在2.70m的顶部空间内双层堆叠。将更坚固、更重的托盘放在底部。验证底部纸箱能够承受上层托盘的重量。在层之间使用滑板或胶合板以均匀分配载荷。用空隙填充物填充顶层托盘上方剩余的10-30cm空隙。

05

填充更大的空隙空间

更高的高度意味着货物上方有更大的潜在空隙空间。未填充的垂直空隙很危险——在恶劣海况下货物可能倾倒进这个空间。在货物顶部和顶板之间使用大型充气袋。对于不同高度的混装货物,用空隙填充物加高较矮的部分,以在集装箱全长范围内形成平整、稳定的顶层。

06

加固和记录

将绑扎带固定到集装箱的系固环上。对于双层堆叠的货物,使用额外的垂直绑扎以防止上层移位。如果可能,在门端的两个高度安装挡货条。在装货过程中拍摄每一层和封箱前的最终状态。记录实际重量以符合VGM要求,并注意高柜的皮重略高。

重量规则

重量分配规则

重货放在底层

在高柜中双层堆码时,重量管理变得更加关键。务必将较重的托盘放在底层。上层应放置较轻、体积大的货物。头重脚轻的高柜比头重脚轻的标准柜更危险,因为额外的高度产生更大的杠杆作用。

前后40/60分配

配载货物时应使约40%的重量位于前半部分,60%靠近门端。这与标准集装箱的原则相同,但对高柜更为重要,因为较高的箱型会在吊车吊装时放大任何前后失衡。

左右均衡平衡

2.70m的高度使横向平衡至关重要。一侧较重的高柜比标准箱产生更高的倾覆力矩。在每一层,特别是上层,都要确保重量左右均匀分布。

地板和堆码限制

地板承载额定值与标准集装箱相同(约3,000 kg/m²)。但还需检查底层货物的堆码承载能力——上层托盘的全部重量压在底层。大多数瓦楞纸箱在潮湿的海运环境中会损失30-40%的抗压强度。

Loading Patterns Library

Optimize your container space with proven loading patterns for different cargo types

Column Stack

Column Stack Pattern

A simple and straightforward loading pattern with boxes stacked in vertical columns. Ideal for uniform cartons with good stacking strength.

Best For

  • • Uniform, rigid cartons
  • • Boxes with good stacking strength
  • • When load stability is a priority

Efficiency

Space Usage:
★★★★★
Stability:
★★★★★
Loading Speed:
★★★★★

Pro Tips

  • • Ensure columns are aligned vertically to maximize weight-bearing capacity of boxes
  • • For added stability, consider plastic wrapping each column or adding corner protectors
  • • Leave minimal gaps between columns to prevent shifting during transport
Interlocking Pattern

Interlocking Pattern

An advanced loading pattern where each layer alternates orientation, creating a more stable structure. This "brick-like" arrangement distributes weight more evenly and prevents collapse.

Best For

  • • Cartons with moderate stacking strength
  • • Medium to long distance shipping
  • • When preventing collapse is critical

Efficiency

Space Usage:
★★★★★
Stability:
★★★★★
Loading Speed:
★★★★★

Pro Tips

  • • Alternate the orientation of each layer by 90 degrees for maximum stability
  • • Ensure boxes can support this load pattern - weaker boxes may crush despite interlocking
  • • Creates better resistance against shifting during transit, reducing damage risk
Pinwheel Pattern

Pinwheel Pattern

An efficient pattern where boxes are arranged in alternating orientations within the same layer, creating a pinwheel-like appearance. This maximizes space utilization and provides excellent stability.

Best For

  • • Rectangular boxes with non-square dimensions
  • • When maximum space utilization is needed
  • • Shipments requiring both stability and efficiency

Efficiency

Space Usage:
★★★★★
Stability:
★★★★★
Loading Speed:
★★★★★

Pro Tips

  • • Works best when box length is roughly twice its width (2:1 ratio)
  • • Can improve stability and prevent shifting compared to simple stacking
  • • For heavier goods, limit stack height and consider layer separation with slip sheets

Cargo Securing Techniques

Proper cargo securing is essential for safe and damage-free transport. Learn best practices for different cargo types and conditions.

Container Lashing PointsLashing PointsLashing StrapsCargo Units

Lashing & Tie-Down Techniques

Proper cargo lashing prevents movement during transport, reducing the risk of damage and ensuring safe delivery. Container ships can experience significant forces during transit, making secure cargo essential.

Understanding Lashing Points

Standard shipping containers come equipped with built-in lashing points in the floor, walls, and ceiling. These anchor points are designed to secure cargo with straps, ropes, or chains.

  • • Floor lashing points can typically handle 2,000-5,000 kg of load
  • • Wall and ceiling points usually have lower capacity (1,000-1,500 kg)
  • • Always check the specific lashing point capacity in your container documentation

Effective Lashing Techniques

Diagonal Lashing

Straps run diagonally from the cargo to the lashing points, creating tension that prevents movement in multiple directions.

Loop Lashing

Straps form loops around the cargo and attach to lashing points on the same side, providing lateral stability.

Cross Lashing

Straps cross over the cargo in an X pattern, providing excellent stability against both lateral and longitudinal forces.

Direct Lashing

Straps connect directly from the cargo to the nearest lashing point, offering simple but effective restraint.

Pro Tips

  • • Always use lashing points on opposite sides to create balanced tension
  • • Check strap tension periodically during loading to account for settling
  • • Use edge protectors where straps contact cargo edges to prevent damage
  • • For heavy cargo, combine multiple lashing methods for redundancy

Essential Tie-Down Equipment

Lashing Straps

  • • Breaking strength: 2,500-10,000 kg
  • • Available in various lengths
  • • Typically made of polyester

Tensioners & Ratchets

  • • Working load limit: 500-5,000 kg
  • • Look for smooth ratchet operation
  • • Choose appropriate size for strap

Hooks & End Fittings

  • • Claw hooks for lashing points
  • • J-hooks for various attachments
  • • Safety latches prevent disengagement

集装箱装箱 - 常见问题

规划下一批货运,顺利发货。

免费开始,无需信用卡,无需安装。

全球超过2,500名物流专业人士正在使用