Gratis Pallet Rekenmasjien

Hoeveel Pallets Pas in 'n Container?

Kies jou pallet-tipe, voer jou gelaaide afmetings in, en sien presies hoeveel pas - met 'n lewendige bo- en sy-aansig visualisering.

Pallet Tipe:

Afmetings verteenwoordig 'n gelaaide pallet. Pas hoogte en gewig aan om by jou vrag te pas.

Top View 5,898 × 2,352 mm
Side View Height: 2,393 mm

Cargo exceeds container capacity! Maximum units possible: 8

Optimal Loading Pattern

Per Layer Configuration:

  • • 2 × 4 units (8 per layer)
  • • Maximum layers: 1
  • • Total capacity: 8

Current Loading:

  • • Requested quantity: 20
  • • Required layers: 3
  • • Exceeds capacity - Too many units

Utilization Analysis

Space Utilization 83.9%

Optimal utilization

Weight Utilization 69.0%

Underutilized - consider consolidation

Cargo Details

Dimensions

Weight and Quantity

Loading Properties

Special Handling Requirements:

Quick Tips

  • • Enter dimensions in millimeters (mm)
  • • Weight should be in kilograms (kg)
  • • For multiple identical items, use the quantity field

Understanding Weight Distribution

From basic principles to advanced weight distribution techniques

Top View 5,898 × 2,352 mm
Side View Height: 2,393 mm

Load Analysis

Longitudinal CoG
50.0%
Lateral CoG
50.0%
Vertical CoG
50.0%

Distribution Status

The weight distribution could be improved. Consider adjusting your cargo arrangement.

Weight Distribution Basics

60/40 Rule

The weight in your container should be distributed with approximately 60% toward the front and 40% toward the rear.

Tip: For a 40ft container, aim to position heavier items in the front half, but avoid concentrating all weight at the very front.

Center of Gravity

Keep the center of gravity as low and centered as possible. This improves stability during transport.

  • • Horizontal CoG: Aim for 45-55% range along both axes
  • • Vertical CoG: Keep below 40% of container height
  • • Load heaviest items at the bottom center

Common Mistakes

Avoid loading heavy items at the container ends or stacking heavy items on top of lighter ones.

  • • Off-center loading causing container tilt
  • • Top-heavy configurations leading to instability
  • • Uneven weight distribution causing transport issues

Advanced Techniques

Mixed Cargo Strategies

When loading different types of cargo, start with the heaviest items at the bottom and center, then work your way outward with lighter items.

Loading Order
  1. Heavy, rigid items at the bottom center
  2. Medium weight items at floor level surrounding center
  3. Light items on top or at the ends
  4. Fill gaps with dunnage to prevent shifting
Weight Transitions

Create gradual weight transitions, avoiding abrupt changes from heavy to light areas. This prevents concentration points that could lead to structural failures.

Special Cases

For specialized cargo like machinery or vehicles, additional considerations for tie-down points and weight distribution become crucial.

Machinery & Heavy Equipment
  • • Spread weight using load-spreading material (steel plates, timber)
  • • Position equipment so axles run perpendicular to container length
  • • Use dedicated lashing points rated for the load weight
Vehicles
  • • Position heaviest vehicles toward the container door
  • • Use wheel chocks and lashing at 45° angles
  • • Ensure fuel tanks are below 25% capacity

Practical Guidelines

Safety Thresholds

Weight Imbalance Limits
DirectionWarning LevelCritical Level
Longitudinal±10% from center±15% from center
Lateral±5% from center±10% from center
VerticalAbove 40%Above 60%
Point Load Limits

Standard containers have floor load ratings of 4,500-5,500 kg/m². Exceeding these limits requires load-spreading equipment.

Pre-Transport Inspection

Visual Checks
  • Container sits level on chassis with no visible tilt
  • No bulging of container walls visible
  • Door operation smooth with no tension
  • No cargo movement after minor chassis movement
Documentation

Always document load distribution with photos and weight calculations. This provides evidence of proper loading in case of damage claims or inspections.

Professional Insights

Professional container loading requires consideration of the entire journey, including handling methods, transportation modes, and potential rehandling requirements.

Intermodal Considerations

Containers traveling by multiple modes (sea, rail, road) experience different forces. Rail transport introduces longitudinal forces during coupling, while sea transport adds rolling motions.

Temperature Effects

Cargo loaded in cold environments may shift during transit through warmer climates due to condensation and material expansion/contraction. Allow for thermal movement in securing methods.

Transport Regulations

Different countries have varying road transport weight distribution requirements. Plan for the most restrictive requirements on your cargo's journey to avoid reloading.

Verwysing

Standaardpalletafmetings wêreldwyd

Die palletstandaard wat in jou oorsprongs- en bestemmingsland gebruik word, beïnvloed hoe doeltreffend jou houer gevul word.

StandaardStreekLengteBreedteLeë Massa
EUR / EPALEuropa1200 mm800 mm~25 kg
EUR2Europa1200 mm1000 mm~33 kg
GMA (48×40")Noord-Amerika1219 mm1016 mm~27 kg
AsiaAsië-Stille Oseaan1100 mm1100 mm~20 kg
AustralianAustralië1165 mm1165 mm~27 kg
US ChemicalNoord-Amerika1067 mm1067 mm~18 kg

Wenk: Pas jou palletstandaard by die bestemming aan

EUR-pallets is die mees wêreldwyd aanvaarde. As jy na die VSA verskeep, word GMA-pallets verkies. Nie-passende pallets kan hanteringsprobleme by bestemmingspakhuis veroorsaak.

Vinnige Verwysing

Pallets per houer - op 'n oogopslag

Enkellaag, sonder stapeling, standaard laaihoogte van 1450 mm. Gebruik die sakrekenaar hierbo vir presiese resultate met jou werklike afmetings.

HouerEUR-palletsGMA-palletsAsië-palletsAU-pallets
20' Standard11101010
40' Standard20202121
40' High Cube20 (of 40 gestapel)202121
53' Domestic28262727

40 vt High Cube het 'n interne hoogte van 2.7 m - genoeg om sommige vragsoorte dubbel te stapel. 53 vt is slegs vir binnelandse gebruik in die VSA.

Pro Tips

Hoe om meer pallets in 'n houer te pas

Klein veranderinge in oriëntasie en beplanning kan 2–5 ekstra pallets per houer byvoeg.

Probeer albei oriëntasies

Deur pallets 90° te draai, kan soms 'n ekstra kolom toelaat. Die sakrekenaar hanteer dit outomaties wanneer 'Toelaat om te draai' aangekruis is.

Meng oriëntasie per ry

In 'n 20vt houer kan die laai van 2 rye van 4 EUR-pallets (portret) plus 1 ry sywaarts gedraai dikwels 'n 11de pallet pas.

Gebruik EUR2 vir wye vrag

EUR2-pallets (1200×1000mm) kan meer doeltreffend wees as EUR-pallets wanneer jou vrag natuurlik beter op 'n wyer basis pas.

Stapel wanneer vrag dit toelaat

'n 40vt Hoë Kubus bied 2,7m interne hoogte. Gelade pallets van 1,2m hoogte kan dubbel gestapel word, wat die kapasiteit effektief verdubbel.

Kontroleer laaivermoë voor spasie

'n 20vt houer het 'n maksimum laaivermoë van ~21 ton. As jou pallets swaar is, kan jy die gewigslimiet bereik voordat die vloer vol is.

Laat speling by die deure

Laat 50–100mm speling tussen die laaste pallet en die houerdeure om veilige sluiting en vasmaak moontlik te maak.

FAQ

Pallethouer Kalkulator - Mees Gestelde Vrae

Jou volgende versending, beplan en op pad.

Begin gratis. Geen kredietkaart. Geen installasie.

Gebruik deur 2 500+ logistiek-professionele wêreldwyd